55.) Option for machine where I/O modules could be shut down for maintenance with zones, but still allow the machine in other zones to run. It is recommended to set this up. Enter a variable name for each of the “Safety Connection Status.” NX (Safety) Program Video - Insert New Line (network) Video - Create a basic program 56.) Multiview Explorer -> Programming -> POUs -> Programs -> Program0. Note: To change the name of program0, right click and select “rename”. Type in the new name and press “enter”. 57.) Double click on the program name. 58.) In the toolbar (on the right side), open up the “Boolean Operator” section by clicking on the arrow. QSG-NX-S-STANDALONE - Version 3.2 Feb.
27, 2015 Page 19 OMRON AUTOMATION & SAFETY • © 2015 Omron Electronics LLC • www.omron247.com