5. Configure the connection as shown, and click OK. 6. Configure the RPI for 10 ms, and click OK . Tags will have been created automatically for the OmronNJ connection as shown below. 7. Download the project to the CompactLogix processor using RSLogix 5000. 8. Using RSLogix 5000 and Sysmac Studio to set data and monitor the data in the 2 controllers, verify the operation of the EtherNet/IP Tag Datalink. Data from NJ to CompactLogix Data from CompactLogix to NJ QSG-NX-S-STANDALONE - Version 3.2 Feb. 27, 2015 Page 34 OMRON AUTOMATION & SAFETY • © 2015 Omron Electronics LLC • www.omron247.com