Versions You can use the Sysmac Studio to check unit versions. Checking the Unit Version of an NJ-series CPU Unit You can use the Production Information while the Sysmac Studio is online to check the unit version of a Unit. You can do this for the CPU Unit, CJ-series Special I/O Units, and CJ-series CPU Bus Units. You cannot check the unit versions of CJ-series Basic I/O Units with the Sysmac Studio. 1 Double-click CPU Rack under Configurations and Setup - CPU/Expansion Racks in the Multiview Explorer. Or, right-click CPU Rack under Configurations and Setup - CPU/ Expansion Racks in the Multiview Explorer and select Edit from the menu. The Unit Editor is displayed.
2 Right-click any open space in the Unit Editor and select Production Information . The Production Information Dialog Box is displayed. Changing Information Displayed in Production Information Dialog Box 1 Click the Show Detail or Show Outline Button at the lower right of the Production Information Dialog Box. The view will change between the production information details and outline. Outline View Detailed View The information that is displayed is different for the Outline View and Detail View. The Detail View displays the unit version, hardware revision, and various versions. The Outline View dis- plays only the unit version.
Note The hardware revision is separated by “/” and displayed on the right of the hardware version. The hardware revision is not displayed for the Unit that the hardware revision is in blank. Changing Information Displayed in Production Information Dialog Box 1 Click the Show Detail or Show Outline Button at the lower right of the Production Information Dialog Box. The view will change between the production information details and outline. 20 NJ-series Robot Integrated System Startup Guide (O049) Checking Unit Versions with the Sysmac Studio