Making Connections Connecting External Devices To change display settings in the BIOS Setup Utility 1. Close all applications, then shut down Windows and reboot the OmniBook. 2. When you see the following message, press F2 to enter the BIOS Setup Utility. Press to enter SETUP 3. From the Main menu, use the down arrow to highlight Video Display Device. 4. Press ENTER to view choices. 5. Select External, Internal, or Both. 6. Press F10 to save settings and exit Setup. To connect a parallel device The parallel port uses a standard 25-pin connector, most commonly used for connecting a printers. These include dot matrix, ink-jet, and laser printers.
The parallel port supports both EPP and ECP capabilities (if selected in BIOS Setup). • Connect the parallel printer cable or other parallel cable to the parallel port. The OmniBook has one parallel port. Its address and properties can be set in the BIOS Setup Utility. Parallel port 5-11