HP — OmniBook 3000 User's Handbook

Connecting a Port Replicator The port replicator can maintain external connections for the OmniBook that you can leave in place whenever you remove the OmniBook from your desk. Instead of disconnecting and reconnecting peripheral devices whenever you take the OmniBook with you, you simply undock and dock the OmniBook with its port replicator. Refer to the OmniBook Port Replicator User’s Guide for more information. To dock the OmniBook with the port replicator You do not need to turn off the OmniBook before inserting it into the port replicator. 1. Plug the power cord into the ac adapter, then into an ac outlet. Plug the ac adapter into the port replicator. 2.

Slide the OmniBook’s rear port door to the left. 3. Place the OmniBook on the port replicator platform, with the back of the computer facing the port replicator's docking connector. 4. Position your fingers on the platform grips as shown below. Use your thumbs to push the computer into the port replicator until the computer slides into place. 35