Monitoring Battery Power It’s a good idea to use the ac adapter during operations that take more power—for example, those involving certain external connections, such as using a floppy drive or serial port. To check the battery status • Check the battery indicator in the status panel. The shading indicates the approximate charge level, rounded to the nearest 10%. • The upper and lower triangles indicate the presence of main (upper) and secondary (lower) batteries. A triangle blinks when that battery is in use. Full charge • The battery is low when there are no bars shown inside the battery cell. The outline blinks and the computer beeps when the battery charge is critically low.
Low battery • A defective battery shows no battery activity and no charging. Defective battery • The battery is overheated, so no charging takes place. Hot battery • AC adapter is connected. If the indicator is blinking, then the battery is also being charged. AC power • Move the pointer onto the battery indicator at the right end of the taskbar. The approximate battery charge is displayed in a pop-up window. For additional power information, open the Control Panel Power window. To respond to a low-battery warning When battery power is critically low, the battery indicator in the status panel appears empty and starts to blink. A warning beep reminds you to save your work.
The OmniBook automatically hibernates (turns off) to preserve your current session and data. (If Hibernate is disabled in the BIOS Setup utility, then your data are not protected.) You won’t be able to turn the computer on again until you restore power by one of the following actions: • Plug in the ac adapter. See “To recharge the battery or run on ac power.” –or– • Install a secondary battery that’s charged. 40