• Pointing devices do not work in the BIOS Setup utility. • Active keys are described along the bottom of the window. • Help information for the highlighted item appears on the right side of the window. 3. Select the Power menu. 4. Select Power Management Mode and use the F5 (or F6) key to move through the list of options and select one other than Disabled: • Max. Power Savings: The time-out settings are predefined for best power savings (using relatively short time-outs). • Max. Performance: The time-out settings are set for fast performance with some power conservation (using relatively long time-outs). • Customized:
You determine each setting for Smart CPU Mode, Standby Time-out, Suspend Time-out, Hibernate Time-out, and Hard Disk Time-out. For definitions of these power modes, see “To start and stop the OmniBook.” 5. Optional. Choose a setting for Time-out on AC. If you want the time-outs to occur even when the OmniBook is connected to ac power, choose Enabled. To prevent time-outs while the OmniBook is plugged in, choose Disabled. 6. Press F10 to save and exit the BIOS Setup utility. 26