3. Place the CD into the drive (label facing up) and gently press down to seat the CD on the spindle. –or– Remove the CD. 4. Slide the CD-ROM tray back into the module to close it. If the CD-ROM drive has no power and you need to remove a CD from it, you can manually open the CD-ROM drive by inserting a straightened paper clip in to the recessed hole (as shown above). Connecting External Devices • To connect an external monitor. • To connect a printer or other parallel device. • To connect a serial mouse or other serial device. • To connect an external PS/2 keyboard or a PS/2 mouse. • To connect a universal serial bus device. • To connect an audio source, a microphone, or headphones.
• To make an infrared connection. To connect an external monitor 1. From the Start menu, shut down the OmniBook. 2. Connect the monitor cable from the monitor to the VGA port on the rear of the OmniBook. 3. Connect the monitor to a power source and turn it on. 4. Press the blue power button to turn on the OmniBook. 5. If the external monitor has a different resolution from the internal display, adjust the display properties (Start, Settings, Control Panel, Display, Settings). 29