To connect an audio source, a microphone, or headphones Your OmniBook has a built-in microphone above the keyboard and two stereo speakers. The audio jacks allow you to plug in external audio devices: • Plug a stereo input source (such as a CD player) into the input (left) jack. • Plug the microphone into the microphone (middle) jack. The built-in microphone turns off. • Plug devices such as headphones or external (amplified) speakers into the output (right) jack. The built-in speakers turn off. Caution Do not use mono audio plugs, which can damage the computer.
To connect a television If your television has an S-video port, you can connect it to the OmniBook and use your television display as a monitor. For complete information about connecting a television, refer to the OmniBook Reference Guide. To make an infrared connection Note Windows NT 4.0 does not support infrared communication. The OmniBook provides two infrared ports—one on the front of the OmniBook (below the latch) and one on the rear panel. These infrared ports provide wireless, serial communication between the OmniBook and other infrared devices such as printers or other OmniBooks. By default, the infrared ports are not enabled.
You must install the appropriate infrared driver, enable it in the BIOS Setup utility, and choose to use either the front or rear infrared port. Refer to the Reference Guide and the driver’s Readme files for complete information about infrared connections. Front Infrared Port 34