• DOS games and other programs that drive CPU usage toward 100% can contribute to a temperature increase. If the OmniBook pauses or runs sluggishly • This may be normal Windows behavior (background processing can affect response time). • Check the BIOS Setup settings. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the Power menu, set the Power Management Mode to Max. Performance. • Certain background operations (such as virus scans) can affect performance while they’re running. 4. Press F10 to Save and Exit the BIOS Setup utility.
• Some file browsers may be unresponsive while they’re processing a graphic image or waiting for broken network connections to time out. • Install additional memory if Windows is spending a lot of time swapping to disk. • Check amount of available free disk space. Power and Battery Problems If the OmniBook turns off immediately after it turns on • Battery power is probably extremely low. Plug in the ac adapter, insert a new charged battery module, or insert a second battery module. If the OmniBook keeps beeping • The OmniBook beeps for 15 seconds when the battery is low. Save your work, quit immediately, and insert a charged battery or plug in the ac adapter.
If the OmniBook has a short operating time • Try conserving power using any of the suggestions listed under “To optimize battery operating time.” • If the operating time has gotten shorter and the battery is more than a year or two old, you may need to replace the battery. • Turn down the display brightness (Fn+F1). • Check the Power Management settings in the BIOS Setup utility. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the Power menu, make sure the Power Management Mode is set to Max. Power Savings. 4. Press F10 to Save and Exit the BIOS Setup utility. If battery indicator is inaccurate 45