Troubleshooting Solving Basic Problems If the computer seems slow • Check that Cache is enabled (in the System Configuration Utility, open the System menu and check Enable Cache). • You might need to install more RAM. The memory-expansion boards are HP part numbers F1168A (16 MB), F1169A (32 MB) and F1119A (64 MB). • Try pressing the reset button. If the infrared connection does not work • Try re-aligning the two devices to align their infrared ports. Make sure the two devices are no more than 0.5 meter apart. • Check the settings in your communications software and in the OmniBook's IR Monitor. IrDA must be enabled.
If a parallel device does not work • The bus speed of the device may be too slow for the OmniBook. Try decreasing the OmniBook’s bus speed by pressing FN+MINUS (-). You can restore the normal speed by pressing FN+PLUS (=). If you cannot install Windows NT 3.51 • In the System Configuration Utility, under the System menu, Boot Devices, enable the checkbox Force PCI Bridge Configuration. 5-7