Quick Start Instruction E5CC OMRON 1. Connections & Settings This section discusses the basic settings and connections. Before contacting the help desk, please be sure to go through these. 1.1 Connecting the E5CC A connection diagram is displayed on the side of each controller. (See Figure 1.) The picture below is an example, the type you purchased may deviate from this. Most connections and numbers are identical, however. Figure 1: Connection diagram.
Term Terminal(s) 1 - 2 are the control output for heating / cooling unit Terminal(s) 4 - 5 - 6 are for the sensor, such as thermocouple or Pt100 Terminal(s) 7 - 8 - 9 - 10 are the alarm / help connections Terminal(s) 11 - 12 are the power voltage CAUTION! 24V or 100-240V Terminal(s) 13 through 18 are for options 5