Tutorial: Building a Simple Project 10.In the worksheet body, enter the tags and their associated device addresses — for each tag: a) In the Tag Name field, type the name of the project tag. b) In the Address field, type the value to be added to the header to form the complete device address. Completed worksheet body 11.Click the Application button at the top-left of the development environment, and then click Save on the Application menu. 12.When prompted to choose the driver sheet number, type 1 and then click OK . Monitoring device I/O during runtime This part of the tutorial shows how to monitor device I/O during runtime by using the Log window. 1.
On the Home tab of the ribbon, in the Local Management group, click Run . The project runs and the startup screen is displayed. 2. Press ALT+TAB to switch back to the development application. 3. Right-click in the Output window, and then click Settings . The Log Settings dialog is displayed. 4. Select the Field Read Commands , Field Write Commands , and Protocol Analyzer options. 5. Click OK to close the Log Settings dialog. Page 85 Tag Name Address Complete Device Address Level[1] 1 4X:1 (Holding Register 1) Level[2] 2 4X:2 (Holding Register 2) Level[3] 3 4X:3 (Holding Register 3)