Chapter 2 Basic Description of Delta OPC setting of a config file. The project management area in a configurator window a c dopts an interface whi h uses a hierarchical structure, as shown in figure 2-21. Address Space is used to create the objects that users want to monitor. Conversion is used to create conversions. Alarm Definition is used create limit values. Device Parameters and Templates are not provided by Delta OPC version 1.0. Please refer to the following chapters for more information about the project management area in a configurator window. Figure 2-21 Project management area The boxes in the working are item clicked in the project ement area.
If the item clicked in t nfigurator window as subitems, the subitems will be displayed at the top of the working area, as shown in figure a in a configurator window vary with the he project management area in a co manag h 2-22. Please refer to the following chapters for more information about the working area in a configurator window. Figure 2-22 Working area 2.2.6 Display Area of Monitor View When Monitor View is executed, the valu nitored or the states of the registers ated are shown in the display area of Monitor View, as shown in figure 2-23.
Please refer to the following chapters for more information es in the registers mo monitored, and the information about the connection cre about the usage of Monitor View. Figure 2-23 Display area of Monitor View 2-9