Orion-Tr Tr Smart DC-DC Charger Non-Isolated — 9.2.2. Charger Mode - STATUS tab

Orion-Tr Smart DC-DC Charger Non-Isolated 9. VictronConnect - Orion Smart DC-DC Charger 9.1. Introduction Thank you for using VictronConnect. This guide will help you get the most out of your Orion Smart DC-DC Charger and it requires a minimum knowledge of this charger that can be found in the introduction . The information available here applies to all Orion Smart DC-DC Chargers. To simplify the reference to the Orion Smart DC-DC Charger, it will be refer as just Orion Smart in this guide.

More general information about the VictonConnect App - how to install it; how to pair it with your device; and how to update firmware, for example - can be found by referring to the overall VictronConnect manual . Note: Where input and battery voltage are referred to in these instructions, a 12V input and battery is assumed. Please multiply the given values by 2 for installations configured for 24V, and by 4 for those configured for 48V. 9.2. Live Data Information VictronConnect can display key data of the Orion Smart (and other compatible smart products) on the Device list page without the need to connect to the product.

This includes visual notifications of warnings, alarms, and errors that enable diagnostics at a glance. 9.2.1. Instant Readout over BLE The advantage is: Better range than a regular Bluetooth connection No need to connect to the smart product Key data at a glance Encrypted data Please see the Instant Readout chapter in the VictronConnect manual for more information and how to set it up. 9.2.2. Charger Mode - STATUS tab Orion Smart [SERIAL NUMBER] confirms the connected device. A custom name can also be set if desired. Mode icon shows in which mode the Orion Smart is operating ( Charger in this case) Charger State : VictronConnect - Orion Smart DC-DC Charger Page 26