Orion-Tr Smart DC-DC Charger Non-Isolated 9.4. Product Information Select the menu icon in the top right of the Settings screen to open the Product information screen. VictronConnect - Orion Smart DC-DC Charger Page 30 • Product: Displays the Orion Smart model. • Serial number: Displays the serial number of the unit. • Pin code: Allows the PIN code to be changed. It is recommended to change the default PIN code to prevent unauthorised access to settings and information. • Custom name: Allows the product name to be changed. By default, it shows “Orion Smart” followed by the serial number. • Firmware:
Displays the currently installed firmware version and allows a firmware update to be performed. • Bootloader: Displays the bootloader version. • Bluetooth: Select one of the following three options: • Enabled: Bluetooth is permanently enabled (default). Choose Enabled when ease of access and frequent configuration outweigh any security concerns. • Enabled for 30 seconds: Bluetooth is enabled for 30 seconds after power up to allow temporary service or commissioning access. After this period, Bluetooth switches off automatically, reducing permanent Bluetooth exposure. To enable Bluetooth again, repower the unit (disconnect and reconnect the battery input cable). • Disabled: Warning:
Selecting this option permanently disables Bluetooth after the VictronConnect session is closed. Bluetooth cannot be enabled again. Use this option only for installations where Bluetooth access must be permanently prevented. • Instant Readout via Bluetooth: Enables Instant Readout live data. • Instant Readout details: Displays Instant Readout encryption details, such as the MAC address and encryption key.