Remove rear cover Step 1 Remove the following assemblies: • Remove the toner cartridge. See “Toner cartridge removal and replacement” on page 96. • If installed, remove tray 3. See “Remove tray 3” on page 97. • Remove the cassette from tray 2. See “Remove the cassette from tray 2” on page 97. • Remove the DIMM cover. See “Remove DIMM cover” on page 99. Step 2 Open the rear output bin and release the diverter pivot pins (callout 1). Let the open door rest on the work surface. 2 1 Figure 60. Disengage the diverter locking pins Step 3 Remove the two mounting screws (callout 1). 1 Figure 61. Rear cover mounting screws 100 Chapter 6 Removal and replacement C7058-90936