Remove formatter PCB Step 1 Remove the following assemblies: • Remove the toner cartridge. See “Toner cartridge removal and replacement” on page 96. • If installed, remove tray 3. See “Remove tray 3” on page 97. • Remove the cassette from tray 2. See “Remove the cassette from tray 2” on page 97. • Remove the DIMM cover. See “Remove DIMM cover” on page 99. • Remove the EIO card (if installed). See “Remove I/O cover” on page 98. Step 2 Disconnect the ribbon and power cable (callout 1) and remove the five mounting screws (callout 2) that secure the PCB and shield to the printer drive assembly. Step 3 Lift off the formatter PCB and shield. 21 2 2 Figure 79.
Remove formatter PCB 112 Chapter 6 Removal and replacement C7058-90936