Step 4 Align the locking tab bushing with the opening in the roller carriage. Step 5 Slide the bushing away from the roller assembly. Note To make the bushing slide more easily, rotate the bushing lever toward the rear of the printer (after the locking tab clears the carriage opening). Figure 126. Slide the bushing away from roller assembly Step 6 Unsnap the locking lever of the black bushing (callout 1) and rotate to align the bushing’s locking tab with the opening in the roller carriage. Step 7 Slide the bushing away from the roller assembly and remove the it from the roller assembly shaft. 21 Figure 127. Remove black bushing 150 Chapter 6 Removal and replacement C7058-90936