30 Instruments and Control Devices Lighting Adjusting Headlamp Height* Follow Me Home Hazard Lights To activate the follow me home function, turn off the headlamp and pull the light control lever towards the steering wheel for one second twice after turning off the vehicle and turning the ignition switch to the ACC or LOCK position, or after removing the key. After remote locking, the low beam will automatically turn off 1 minute later (the automatic off duration can be set on the head unit*); if the vehicle is not remotely locked, the low beam will automatically turn off 10 minutes later. The headlamp height adjustment knob is located on the left side of the instrument panel.
Press the button to activate turn on/turn off the hazard lights. Lights On Reminder Adjust the headlamp illumination distance according to the vehicle load for optimal visibility without causing glare. Set the knob to the desired position: If the light switch is not turned to the OFF position after turning the ignition key to the LOCK position or removing the key, the buzzer will sound an alarm when the driver's door is opened. The alarm sound stops after the lights are turned off. 0 = front seats occupied 1 = all seats occupied 2 = all seats and trunk compartment occupied 3 = driver seat and trunk compartment occupied