40 Driving and Operating Guide disconnected and leakage protection to be activated in case of emergency. The ground cable must be properly installed. 3. Make sure to choose high-quality NOTES When using the AC charging gun distributed in the vehicle, the charging capacity is less than 2KW. If the vehicle is equipped with OBC (On-Board Charger) 3.3KW or 6.6KW, the charging capacity can only reach 3.3KW or 6.6KW when using high-voltage AC charging. When a vehicle with a 6.6KW OBC is charging at high voltage with the door open, the charging capacity will be significantly reduced. Ensure the door is locked for normal 6.6KW charging. Charging Precautions: 1.
Check if the parking brake is fully engaged (activated), and the vehicle is off. 2. Do not drive the vehicle while cables and sockets, and consult a professional electrical technician to install the supply line and equipment for you. 4. Charging time may vary based on charging. Ensure ventilation in the charging area, and avoid charging in confined spaces. 3. Check the charging cable insulation and sheathing for damage before charging. If damaged, contact the service center for repair or replacement. Ensure that the charging cable is in its natural extended state and not hanging in the air. 4.
During charging, take appropriate battery capacity of the vehicle, environmental temperature, and other factors. safety measures to prevent children and others from approaching the charging vehicle and cable. 5. Ensure no water is present around the charging socket during charging. 6. Do not charge the vehicle in environments with rain, snow, water accumulation, or nearby fire sources. Additionally, refrain from charging in inclement weather. In CAUTION Make sure to ask a professional electrician to install the charging line for you; otherwise, it may cause a fire or electric shock.