50 Driving and Operating Guide Driving and Operating Guide High Voltage (HV) Conditions How to Turn Off the Vehicle: After the vehicle is opened, the driver's door is opened, the instrument cluster will illuminate, and the vehicle enters HV conditions. To turn off the vehicle, make sure you bring the vehicle to a stop in the P position, the parking brake is active, and all doors are closed; then, using the remote and pressing the lock button, the vehicle will automatically turn off. Alternatively, you can press the Emergency OFF button located at the bottom of the steering wheel to immediately turn off the vehicle in any condition.
New Vehicle Trial The following steps can be taken within the first 500 km to improve performance, enhance fuel efficiency, and extend the vehicle's lifespan: In HV conditions, the entire high-voltage circuit is connected. • Avoid emergency shutdowns only if necessary. With this, brakes are able to function properly. • Do not accelerate the vehicle suddenly and continuously; keep the vehicle running at high speeds if possible to avoid motor damage and save power. • Do not tow other vehicles with your vehicle. “READY" Condition When the vehicle enters the "READY" condition, the drive motor is ready for use. Emergency OFF How to Start the "READY" Status:
The vehicle can be shut down in an emergency. If the vehicle is in motion, press and hold the button for 3 seconds or press it 5 times rapidly to immediately shut down the vehicle. The vehicle will then immediately shut down all functions and automatically engage the parking brake once the vehicle has come to a complete stop. Do not use this feature unless absolutely necessary as you will not be able to control the vehicle as all systems will be shut down. 1. The official key is inside the vehicle. 2. All doors have been securely closed. 3. The driver is in the driver's seat. 4. Then, press the brake pedal until the "READY" light on the instrument cluster lights up.