Driving and Operating Guide 57 the displayed number is the desired cruise speed Following the Target Vehicle Set cruise control speed When ACC is activated, use the scroll switch on the left side of the steering wheel to adjust the default cruise speed. A quick scroll will change the speed by 5 km/h, while holding the scroll will allow for 1 km/h adjustments. If the adaptive cruise is activated while the vehicle is traveling at a relatively low speed, the vehicle will automatically accelerate to the default cruise speed. The default cruise speed is set at 30 km/h whenever the system is activated from a stand-still.
When activating the ACC while the vehicle is traveling faster than the default speed, the current vehicle speed will be used as the cruise speed. Adjusting the Following Distance The target vehicle ahead is displayed in blue on the instrument panel. Drivers can adjust the following distance to the vehicle ahead based on their needs. This system is represented by the "following time gap". The following time gap is the time it would take to reach the vehicle ahead at the current speed.
CAUTIONS If there is no blue indicator on the front vehicle on the instrument panel, it means the ACC system is not following the vehicle ahead to adjust the speed, so the driver must actively control the vehicle's speed. The system only provides assistance; the driver must always drive carefully and respond proactively. Once ACC is activated and there are no vehicles directly in front, the cruise control will engage at the desired speed displayed on the instrument panel. If a vehicle ahead is traveling slower than the current speed, the vehicle will maintain a preset time gap.