68 Driving and Operating Guide WARNING 9. If the height of the front of WARNING 18. When strong light directly hits WARNING AEB can prevent collisions or lessen the severity of impacts. When the sensor detects a potential collision, the system will automatically apply the brakes, and the driver can experience sufficient braking force when pressing the brake pedal. However, if the function is triggered and the driver intervenes by pressing the accelerator pedal or steering wheel, the system will automatically deactivate the AEB system. Additionally, this function requires the driver to apply a strong force to the brake pedal during the emergency braking process.
the vehicle is raised or lowered, such as when the vehicle is on an uneven or bumpy road. 10. Modification of the headlights. 11. The brake disc is too hot, too the camera, such as sunlight or headlights from an oncoming vehicle. 19. When the surrounding area is dark, such as at dawn, dusk, night, or inside a tunnel. 20. When turning left or right and cold, damp, etc. 12. There is a large wall or a for a short time after turning (AEB is inactive). 21. When driving on a winding single object in front. 13. There is a small vehicle in road or for a few seconds. 22. When the vehicle is unstable front, such as a motorcycle or bicycle. 14.
The rear of the vehicle in and slipping (when ESP is working). 23. When the front of the vehicle is front is relatively small, such as an unloaded pickup truck. 15. The rear of the vehicle in raised or lowered, for example when the road surface is uneven. 24. When the wheels are not front is lower, such as a tow trailer. 16. When driving in foggy or calibrated. 25. When the wipers obstruct the smoky areas. 17. Driving in places where the camera. 26. When the vehicle is shaking. 27. When driving uphill. brightness level changes suddenly, such as entering or exiting a tunnel.