Driving and Operating Guide 71 This function can operate at speeds between 30 - 130 km/h. If the speed is below this range, the function will not work. This function can also be adjusted through the ADAS menu on the head unit, and to activate it, you must select AUTO in the headlight settings. ABS will monitor the speed of each wheel during braking. If any wheel tends to lock, the system will control the brakes on both front and rear wheels. When ABS is in operation, the brake pedal may experience slight vibrations accompanied by noise sensors, lateral acceleration sensors, and steering wheel angle sensors are added.
The driving and braking forces of the front and rear, as well as the left and right wheels, are controlled through the ECU to ensure lateral stability. When the driver operates the vehicle beyond the specified values, such as turning at high speed, the ESC system intervenes automatically to ensure the vehicle can be brought back under control and to ensure safety. Relevant indicators for the ESC system include the ABS MIL, EBD MIL, ESC MIL, and ESC OFF indicators. Sistem Electronic Brake Force Distribution (EBD) Anti-lock Brake System (ABS) The EBD system uses a high-speed computer to induce and consider different ground conditions where the four wheels tread.
It calculates different friction values during braking. Therefore, the braking methods and forces of the four wheels are different based on different conditions, and can be quickly adjusted during braking, ensuring the vehicle remains stable and safe. As an advanced electric braking system, the Anti-lock Brake System (ABS) is highly effective in preventing vehicle skidding and loss of control. It also provides maximum braking capacity on slippery roads. 1. The indicators light up for a self- check process when the ignition switch is connected.
All four indicators will illuminate for 3 seconds to indicate that the ESC system is undergoing a self-check process, and the indicators are working normally. All four indicators will turn off after 3 seconds under normal conditions. When a malfunction occurs (such as incorrect installation, loose connector, abnormal CAN When the ignition switch is connected, the ABS warning light will briefly illuminate. If the ABS warning light does not go out or comes on while the vehicle is in motion, it indicates a malfunction in the ABS function. Contact the After-Sales Service Center immediately. Refer to the "ABS Warning Light" in the "Instrument and Control Devices" section.
Sistem Electronic Stability Control (ESC)* The ESC system is a new type of active safety system that represents the further development of Anti-lock Brake System (ABS) and Traction Control System (TCS) functions. Additionally, yaw rate