Vehicle Maintenance 89 6. Carefully disconnect the jumper Towing with a Trailer Platform Front Towing Hook cables in reverse order, such as removing the negative cable first, then the positive cable. Towing the Vehicle It is recommended to contact the Official Workshop or a towing service if you need to tow the vehicle. Towing the Vehicle Using a Wheel Lift Turn off the ignition switch, check and ensure that the vehicle is securely attached to the trailer if you want to use a trailer platform to tow your vehicle. There is a cover on the right side of the front bumper of the vehicle; the mounting hole for attaching the towing hook can be seen through the cover opening.
Attach the towing hook to the toolkit, remove the towing hook, and attach it to the mounting hole, turn the towing hook clockwise to tighten it, and insert the socket wrench into the towing hook hole for additional tightening. Perform towing after the tow hook is securely attached. When towing, the driver should operate the turning system and vehicle brakes. Detach the towing hook and close the cover after towing, return the towing hook to the toolkit. Emergency Towing If no towing vehicle is available during an emergency, attach a rope to the front towing hook so that another vehicle can tow your vehicle.
When the front towing hook is used, a tow rope should be used, do not use a rigid tow bar. 1. Activate hazard lights. 2. Release the parking brake. 3. The front wheels should be lifted when being towed Your vehicle can only be towed by another vehicle and cannot be used to tow other vehicles.