BYD Tang — OWNER’S MANUAL - Archive.org

lines. Checking the break fluid: 3. If the liquid level is below "MIN", add the 1. Open the bonnet and remove its middle designated coolant so that the level is between the "MAX" and "MIN" marker lines (refer to the Vehicle Information -Technical Parameters-Type and Dosage of Vehicle Filling Liquid ). 2. Check that the brake fluid level is trimming. between the "MAX" (maximum scale line level) and "MIN" (minimum scale line level) marker lines. • When the vehicle is hot, do not touch the auxiliary coolant tank or remove the filler cap. WARNING! 3.

If the liquid level is below "MIN", add the designated brake fluid so that the liquid level is between the "MAX" and "MIN" marker lines (refer to the Vehicle Information -Technical Parameters- Type and Dosage of Vehicle Filling Liquid ). • Coolant must be stored in marked containers and kept out of the reach of children. • If the coolant comes into contact with skin or eyes, immediately wash the affected area with abundant water and seek medical help at once. WARNING! • Brake fluid must be stored in marked containers and kept out of the reach of children.

• If the brake fluid comes into contact with skin or eyes, immediately wash the affected area with abundant water and seek medical help at once. CAUTION! • The use of any non-designated coolant may damage the cooling system. CAUTION! • Do not let brake fluid come into contact with the paint. If it happens, wash it off immediately. SUSTAINABILITY • Waste coolant must be disposed of in accordance with local regulations. • The use of any non-designated brake fluid may damage the brake system. • It is recommended that brake fluid is replaced by a BYD authorised dealer or service provider.

Checking Brake Fluid SUSTAINABILITY • Waste brake fluid must be disposed of in accordance with local regulations. 174