BYD Tang — OWNER’S MANUAL - Archive.org

Data Collection and Processing parties. In case this access takes place during vehicle maintenance, the information can also be transmitted to BYD Europe engineers for quality assurance, product defect reports or customer claim verification. This section provides you with some important information on how personal data is collected and processed when you use a BYD vehicle. For a more detailed overview on data processing, data protection and data subject rights, please read the current version of the privacy policy for the vehicle available at the BYD website www.bydauto.eu . Remote-services-related data Remote monitoring services Your vehicle has remote monitoring services.

These include remote monitoring services such as remote diagnosis and Over-the-air (OTA) updates and upgrades for security and safety purposes (subject to your approval). These monitoring services serve the following purposes: provision of our services to you (remote support/ diagnostics), product development and security/public safety. Vehicle Data Processing When using the vehicle, information is collected at the vehicle. This includes data such as data collected or transmitted by vehicle sensors or control units which is necessary for the safe functioning of your vehicle.

In some cases, the data is used to support driving (driver assistance systems) or to enable a specific comfort or infotainment function. Personal data that is collected and processed mainly include in- vehicle data, remote-services-related data, and other data, as further specified below. Depending on your country and set-up, various vehicle information can be transmitted to BYD Europe for the above purposes, including vehicle location information, vehicle status, such as energy consumption, vehicle speed, gear position, power mode, ESP status, steering system status, battery status, powertrain status and overall vehicle performance status.

In-Vehicle Data Operation data Other When operating the vehicle, various data on the status of the vehicle (e.g. speed, battery level, braking system) or the environment (e.g. distance sensors, rain sensor, temperature sensors) are collected and processed. This data is not usually stored, but there are control units, sensors or other components installed in the vehicle that record such data, for example to record maintenance requirements, error messages or other information.

The in-vehicle data will only be stored in the equipment in the vehicle but can be read out via the legally required OBD ("On Board Diagnostics") interface, for example by BYD authorised dealer or service provider or other third Infotainment system Depending on the configuration of your vehicle, you can add data to the Infotainment system of the vehicle yourself. Depending on the configuration, this includes, for example, media data for playing films on the Infotainment system, address data when using the navigation system or data for using online services. Depending on the configuration of your vehicle, you may also be able to make certain individual settings in and on the vehicle.

If this data is stored in the vehicle, you can delete it at any time. If this data is transferred to third parties (because you 200