Adjust the seat belt height as follows: 1. Press the release button of the seat belt 2. Move it up or down to the desired height height adjuster. and release the button. 3. Check that it is locked into place by trying to move it without pressing the button. WARNING! Slowly and smoothly pull out the seat belt from the retractor, cross over the chest and hips. Ensure that the lap portion of the seat belt is as low as possible. Never fasten the lap portion over the abdominal area. • Make sure the seat belt is properly adjusted and locked before driving. Failure to do so may jeopardize proper seat belt protection in the event of a collision. WARNING!
• Never place anything between the occupant and the seat belt. Seat Belt Pre-Tensioner The front seat and second row seat are equipped with pre-tensioner seat belts. Adjusting Front Seat Belt Height When the vehicle suffers a severe frontal collision and the activating conditions of the pre-tensioner are met, the pre-tensioner quickly retracts some of the seat belt and locks it to further protect the occupant. The pre-tensioner limits the restraint force the seat belt places onto the occupant's body within a certain range, so as to avoid any injury to the occupant caused by excessive restraint force.
Seat belt height adjusters are provided on both the driver's and the front passenger's sides to ensure correct positioning of the seat belt. Adjust the seat belt height and let the shoulder portion of the seat belt pass roughly through the centre of your shoulder, away from the face and neck. WARNING! • The certified seat belt must be replaced if pre-tensioner function has been activated. 46