WARNING! • The seat must be adjusted correctly to ensure that the brake pedal can be fully pressed. On this premise, the seat position should be as far back as possible to ensure a comfortable ride and make handling easier. Seat Memory 06 Lumbar support adjustment: press the front or rear part of the switch to strengthen or weaken the lumbar support; Press the upper or lower part of the switch to raise or lower the lumbar support. Memory Button RIDE REMINDER • The contour of the front seat backrest can be changed. The support can be adjusted according to the radian of the lumbar spine, so that the driver and the front passenger can sit correctly and comfortably.
SET "Set" button 1 "1" memory button 2 "2" memory button Setting the Seat Memory When the vehicle is powered on and in "Park", set the seat memory function as follows after adjusting the driver seat, left/ right side mirrors and the steering wheel to your desired positions: Leg support adjustment: pull the handle of the telescopic leg support under the seat, move the leg support forward/backward to a proper position, and then release. • After pressing the "SET" button, press either "1" or "2" memory button within the next 3 seconds. The buzzer will then sound and show a prompt reading "position set". • Press the "SET" button and either "1" or "2" memory button simultaneously.
The buzzer will sound and show a prompt reading "position set". 49