Removing the Headrest window to roll it up/ down to the desired position. 1. Pull up the headrest to its highest 2. Press the adjustment button on the left position (1). One-Touch Rolling Up/Down side of the headrest (2). At the same time, insert a tool with less than 2mm diameter into the hole in the headrest base (3), and press it to unlock the headrest. Press/pull the switch to the corresponding window to its furthest position and release. The window will roll up/down completely. As the window rolls up/down automatically, press/pull the switch to stop the motion. WARNING! 06 • Before closing windows, make sure there are no obstructions to its rolling so as to prevent physical injury.
RIDE Window Anti-Pinch The anti-pinch function is triggered when the window is obstructed while closing. In such case, the window will stop and automatically roll down to some extent. 3. After successfully unlocking the headrest, pull it out. WARNING! Driver Window Control • Do not intentionally trigger the anti- pinch function. Controlling the Driver Window CAUTION! • The anti-pinch function may not work when the window is about to close completely. Side Mirror Controls Before driving, the side mirrors must be adjusted to a proper angle, so as to reduce blind spots and improve driving safety. Window controls are enabled when vehicle is powered ON.
Manual Control Press/ pull the switch to the corresponding 51