BYD Tang — OWNER’S MANUAL - Archive.org

Releasing EPB and all doors are closed; • The vehicle is powered on. Turning AVH On/Off • Manual release : When the vehicle is in any gear other than Park and EPB has been engaged, press the brake pedal and the EPB switch. The EPB indicator goes out along with a text prompt reading "Parking brake released" on the instrument cluster. After the conditions above are all met, press the AVH button to turn AVH on. The switch indicator then lights up. At this time, the AVH function is in standby, and the AVH indicator on the instrument cluster lights up (white). • Automatic release :

When the vehicle is parked on a slope below 10 degrees, press the brake pedal and shift from Park or Neutral to Drive or Reverse to automatically release EPB. The EPB indicator Press the AVH button again to turn it off. goes out along with a text prompt reading "Parking brake released" on the instrument cluster. After the vehicle has come to a complete stop by pressing the brake pedal, the AVH function has been enabled along with both the brake lights and the high mount brake light on, and the green AVH indicator is displayed on the instrument cluster. The brake pedal can then be released.

Automatic Vehicle Hold (AVH) After 10 minutes of operation, AVH reverts to standby and EPB engages automatically. The AVH system can automatically ensure the vehicle remains stationary. When the vehicle is stopped while the power system is running, especially when waiting for traffic lights or driving on busy roads, using AVH can make it so the driver does not have to continuously press the brake pedal or engage the parking brake via the EPB switch. To release and revert the AVH function back to standby, press the accelerator pedal and shift to Park or pull up the EPB switch. Driving at Low Speeds With AVH in standby:

• When shifting to Park, the AVH function takes effect if the vehicle is moving at a low speed. When backing up the vehicle in Reverse at a low speed or driving in Drive at a low speed, the AVH function is restrained to facilitate the smooth Conditions to Enable AVH The AVH system can be enabled if: • The driver has fastened the seat belt, 90