Turning on HMA > DiPilot or pull down Quick Settings menu on the centre console Tap on / touchscreen to turn on Smart Headlights . Activating HMA Rotate the end knob of the light stalk switch to the position. When the vehicle speed is above 35 km/h and necessary lighting conditions are met, HMA activates automatically. It also allows automatic switch between high beam and low beam according to the current driving conditions. REMINDER • When HMA is activated, the HMA indicator on the instrument cluster is on. Turning off HMA The advised adjustments may differ in other vehicle loading conditions. Intermediate adjustments can be chosen. The HMA can be turned off by:
• Rotating the end knob of the light stalk switch away from the High Beam Assist (HMA) • Tapping on > DiPilot or pulling down Quick Settings menu on the centre console touchscreen to turn off Smart Headlights ; / position; The HMA system uses a multi-function video controller on the front windscreen to determine current driving conditions and, if necessary, automatically switches between high/low beams. • Turning high beam on manually. HMA Restrain Conditions HMA will be restrained if:
94 Vehicle Loading Conditions Recommended Levels One person in the driver seat The driver, plus one passenger in the front seat The driver, one passenger in the front seat, all the seats farthest to the rear occupied 0~2 All the seats occupied 0~3 All the seats occupied, plus an evenly distributed load (calculated based on the technically permissible maximum laden) in the luggage boot 0~2.5 Driver, plus an evenly distributed load (calculated based on the technically permissible maximum laden) in the luggage boot 0.5~3