3 Operate with the remote control for the TV. 1) 2) A B C D j (9 thumbnails Zoom in on still picture j Yellow: Deleting scenes/still pictures j Red: Zoom out from still picture/Adjusting 3D effect of the 3D image j / Blue: Converting 2D (3D) images as 3D (2D) Other linked operations Turning the unit off: If you use the remote control for the TV to turn off the power, this unit also turns off. Automatic input switching: If you connect with a HDMI mini cable and then turn on this unit, the input channel on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on automatically (if [Set] has been selected for the TV’s [Power on link] setting).
Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch the input channel. HC-X900M HC-X900 If you are unsure whether or not the TV and AV amplifier you are using are compatible with VIERA Link, read the operating instructions for the devices. Available linked operations between this unit and a Panasonic TV is different depending on the types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating instructions of the TV for the operations that support on the TV. Operation is not possible with a cable that is not based on the HDMI standard.
113 VQT4C76 1) 2) ess the button up, down, left or right to select a scene or still picture to be playe d then press the button in the center to set it. tivate the operation icons that are displayed on TV screen with the remote con e TV. peration icons splay operation icons ancel operation icons splay/Cancel operation icons following operations are available by pressing the color buttons on the remote reen: Switching the number of scenes/still pictures in thumbnail display