1 Flash 2 Self-timer indicator/ AF Assist Lamp 3 Control ring 4 Lens barrel 5 Lens Do not touch the lens barrier. 6 Viewfinder (LVF) 7 Diopter adjustment dial Adjusts the focus in the viewfinder. 8 [LVF] button Use this to switch display between viewfinder and LCD monitor. 9 LCD Monitor 10 Charging lamp (Red)/ Wi-Fi ® connection lamp (Blue)/ GPS status indicator (Green) The color of the lamp differs depending on the function. 11 Strap eyelet We recommend using the supplied hand strap to avoid dropping the camera. 12 [HDMI] socket Do not connect any other cables except the HDMI micro cable. Doing so may cause malfunction.
13 [AV OUT/DIGITAL] socket This socket is also used when charging the battery. 14 Speaker 15 Microphones 16 Mode dial Use this to select the recording mode. 17 Shutter button 18 Zoom lever 19 Motion picture button 20 Camera [ON/OFF] button 21 Tripod mount Do not attach to a tripod with a 5.5 mm (0.22 inch) or longer screw. Doing so may damage this unit. If you are not holding the camera, for example when using self-timer recording or remote recording, the camera could tilt when the lens barrel extends during zooming, so make sure to secure the camera in place with a tripod or by other means. It may not be possible to attach certain types of tripods properly.
22 Card/Battery door 23 Release lever 24 [Wi-Fi] antenna 25 GPS antenna 26 NFC antenna 27 [Wi-Fi] button 28 Playback button Use this to select the recording mode or playback mode. 29 [MENU/SET] button 30 [Q.MENU/ ] / [ ] button You can display the Quick Menu and erase pictures. 31 [DISP.] button Use this to change display. 32 Control dial Turn the dial to select setting items and change setting values. 33 [Fn] button 34 Cursor button (ENG) VQT5E55 11