Let’s Get Started *1 When the earphones are put in the charging cradle, the LED (light blue) flashes once on each side. Put the earphones into the charging cradle again if the LED does not flash. *2 Earphones fully charged. *3 The charging cradle is fully charged when the LED stops flashing. Note: R You can check the remaining charge of the earphones and charging cradle on the home screen of the [Technics Audio Connect] app.
“Home screen”, Page 44 22 Charging cradle status Status description Lid LED color LED pattern Open Light blue Flashing slowly 3 times Off Earphones charging Green*2 Lights for 4 seconds Flashing slowly*3 The charging cradle is sufficiently charged The charging cradle is running low Yellow*2 Lights for 4 seconds Flashing slowly Red*2 Lights for 4 seconds Flashing slowly Close Green Lights for 4 seconds Off The charging cradle is fully charged Lights for 4 seconds Flashing slowly The battery level of the charging cradle has a sufficient charge The battery level of the charging cradle is low charge Yellow Lights for 4 seconds Flashing slowly Red Lights for 4 seconds Flashing slowly