Getting Started For assistance, please visit https://shop.panasonic.com/support 19 3 To call back, press M N. R If you select an entry with “ ”, “ ” or “ ” displayed, an error tone sounds. Wait for 2 seconds until a confirmation message is displayed. Press MYESN if you want to call back. To exit, press MOFFN. Note: R If the entry has already been viewed or answered, “ ” is displayed. R “ ” or “ ” indicates the caller information for blocked calls. R “ ” indicates the caller information for scam calls. Answering system Answering system messages are stored on your telephone’s built-in recording device. By default, the answering system is set to receive message after 4 rings if no one picks up.
When you have a new answering system message: “New message” is displayed on the handset. Voicemail is a service offered by your telephone provider. Messages are stored in their system and accessed remotely. When you have a new voicemail: “Voicemail msg. via phone co.” will be displayed on the handset. Important: R Make sure the unit’s date and time setting is correct (page 12). Turning the answering system on/off Base unit Press MANSWER ON/OFFN to turn on/ off the answering system. Handset 1 To turn on: MMENUN#327 To turn off: MMENUN#328 2 MOFFN Note for base unit and handset:
R When the answering system is turned on, the message counter on the base unit displays the total number of messages (old and new). Listening to messages Using the base unit When new messages have been recorded, the message indicator ( ) on the base unit flashes. Press M N (PLAY). Operating the answering system during playback Key Operation MjN or MkN Adjust the speaker volume M N Repeat message*1 M N Skip message M N Stop playback (STOP) MERASEN Erase currently playing message Key Operation MjN or MkN Adjust the speaker volume M N Repeat message*1 M N Skip message M N (STOP) Stop playback MERASEN Erase currently playing message