Preparing the memory card Inserting/removing the memory card The memory card to use with the unit should always be formatted on the unit. ( l 42) Formatting the memory card will erase all of the recorded data which cannot be restored. Inserting the memory card A Card slot cover B Label side 1 Open the card slot cover. 2 Insert the memory card into the card slot. Card slot 1 and card slot 2 can each insert one memory card. With the label facing in the direction indicated in the diagram, push in until there is a click. Do not force or apply excess force when inserting the memory card. 3 Close the card slot cover. Removing the memory card 1 Open the card slot cover.
Confirm that the card access lamp is not flashing in orange. Data is being written/loaded when the card access lamp is flashing in orange, so do not remove the memory card. 2 Press in the memory card further into the main unit and let go. Pull the memory card straight out when it is released from the card slot. 3 Close the card slot cover. 39 (ENG) DVQX2023