Playback/Editing On the comparison screen, you can use the following operations to make adjustments: A Current setting A [MENU/SET] [Set] Sets the adjusted level and returns you to the item selection screen. If you touch the picture at the center, it will be enlarged. If you touch [ ], the picture will be reduced to the original size. [Setup] setting When you select an item, the screen that asks you to select [Reinstate Adjustments], [Color Space], or [Picture Size] will be displayed. 1 Press 3 / 4 to select an item, and press [MENU/SET]. If you select [Reinstate Adjustments], a confirmation screen will be displayed.
Selecting [Yes] will execute the operation and return you to the item selection screen. 2 Press 3 / 4 to select a setting, and press [MENU/SET]. This operation will apply the setting and return you to the item selection screen. [Video Divide] Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need. Dividing a motion picture is permanent. Decide before you divide! 1 Select the menu. (P28) MENU > [Playback] > [Video Divide] 2 Press 2 / 1 to select the motion picture to divide, and then press [MENU/SET]. 3 Press 3 at the location to divide.
You can finely adjust the location for division by pressing 2 / 1 while the motion picture is paused. 4 Press 4 . Confirmation screen is displayed. It is executed when [Yes] is selected. Exit the menu after it is executed. Avoid trying to divide motion picture near the very beginning or end of the motion picture. You cannot use [Video Divide] for the following pictures. Motion pictures with a short recording time 72 VQT5H68 (ENG) Button operation Touch operation Description of operation 0 2/1 / Dragging DISP. [DISP.] [DISP.]