Wi-Fi/NFC About the Wi-Fi connection lamp Lit blue: The Wi-Fi connection is on standby Blinking blue: Sending/receiving data through the Wi-Fi connection ヸㄊノョㄊ The camera cannot be used to connect to a public wireless LAN connection. Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access point. It is recommended to use a fully charged battery when sending images. When sending images on a mobile network, high packet communication fees may be incurred depending on the details of your contract. Do not remove the memory card or battery or move to an area without any reception while sending images.
The monitor display may become distorted for an instant while connected to the service, however this will not affect the image being sent. If you use the HDMI output during recording with [Bit Mode] in [HDMI Rec Output] set to [4:2:2 10bit], the Wi-Fi function will be disabled. About the [Wi-Fi] button Pressing and holding [Wi-Fi] before connecting to Wi-Fi (When connecting to a smartphone/tablet) The information required for connecting the smartphone/tablet to this unit (QR code, SSID and password) is displayed. (P76) ョㄏヒ ヸㄊノョㄊ Pressing [Wi-Fi] before connecting to Wi-Fi Following items can be selected.
74 VQT5H68 (ENG) [New Connection] — [Select a destination from History] Connects with the same settings as the previous ones. Registering records as favorites 1 Select the item you want to register to favorites, and then press 1. 2 Enter a registration name. [Select a destination from Favorite] Connects with settings registered as favorites.