Wi-Fi/NFC If you are using an iOS device [iPhone/iPod touch/iPad] Using the QR code to set up a connection 1 Press and hold [Wi-Fi] on the camera. ョㄏヒ 2 Start “Image App” on your smartphone/tablet. 3 Select [QR code], and then select [OK]. ヸㄊノョㄊ 4 Using “Image App”, scan the QR code displayed on the screen of the camera. A QR code If you press [MENU/SET] on the camera, the QR code will be enlarged. When it is difficult to scan the QR code, try enlarging it. A 5 Install the profile of “IMAGE APP” . A message will be displayed on the browser. If the smartphone/tablet is locked with a passcode, enter the passcode to unlock the smartphone/tablet.
IMAGE APP Panasonic Corporation 6 Press the home button to close the browser. 7 Turn on the Wi-Fi function in the setting menu of the smartphone/tablet . Wi-Fi 8 Select the SSID displayed on the screen of the camera. 9 Return to the home screen, and then start “Image App”. Steps 2 through 6 are not required from the second time on. (ENG) VQT5H68 77