Recording Marker When selecting and saving pictures from a 4K burst file, you can select pictures easily by skipping between marked positions. White marker: This is manually set during recording or playback. Green marker: This is automatically set by the camera during recording. (Auto Marking function 1 ) Marker operation screen 1 The camera automatically sets markers on scenes in which a face or the movement of a subject is detected. (Up to 10 markers are displayed for each file.) (Example: At the scene when a vehicle passes by, a balloon bursts, or a person turns around) Skips to the marked positions When [ ] is touched, the marker operation screen appears.
You can use to skip to a marked position to select a picture. Touch [ ] to return to the original operation. In the following cases, markers may not be set by the Auto Marking function depending on the recording conditions and the status of subjects. – The camera is moving because of panning or jitter – The movement of a subject is slow/small, or the subject is small – A face is not facing front Switches a marker to be displayed Touch [ ] Settings: [Auto] / [Face Priority] / [Motion Priority] / [Off] 2 2 Displays manually set markers only 39 DVQX2698 (ENG)