Panasonic — Panasonic DC-ZS99 — user manual

Wi-Fi/Bluetooth If you are using an Android device, follow the steps up to here to complete the setup. Proceed to the steps below only if you are using an iOS device. You need to install the profile. Install the profile If the smartphone is locked with a passcode, enter the passcode to unlock the smartphone. Exit the browser Turn on the Wi-Fi function in the setting menu On the Wi-Fi setting screen, select the SSID displayed on the camera (The device name selected in step ) If the SSID is not displayed, it may be displayed after the Wi-Fi function is turned off and on. When you need to change the connected device, follow the on-screen message to change the setting.

Start “Image App” The paired smartphone will be registered as a paired device after connected via Wi-Fi. To make a connection with the paired smartphone for the second and subsequent times, enable the Bluetooth function of the camera and set the Bluetooth for “Image App” on your smartphone to ON. Then, select a camera (device name) to be connected from the [Camera registered] list. [ ] is displayed on the recording screen when a Bluetooth device is connected. If the Bluetooth function is enabled, but the smartphone is not connected, the displayed [ ] is semi-transparent. 56 DVQX2698 (ENG)