Others Q&A Troubleshooting Performing [Reset] in the [Setup] menu may resolve the issue. Further information is provided in the “Owner’s Manual for advanced features (PDF format)”. Check it together with the information in this section. The charging lamp blinks. Charging is being performed in a place with extremely high or low temperature. Reconnect the USB connection cable and retry charging in a place where ambient temperature is 10 °C to 30 °C (50 °F to 86 °F) (temperature conditions also apply to the battery itself). Charging is not possible if the power supply capacity of the computer is low. Camera does not work even if the camera is turned on.
Camera switches off as soon as the camera is turned on. Battery needs recharging. → Charge the battery. (→21) [Power Button(At Power ON)] is set to [LONG-PRESS]. → If you set it to [SHORT-PRESS], you can turn on the camera by briefly pressing the camera [ON/OFF] button. (→26) Multiple pictures are taken when I press the shutter button just once. Check the following settings. If any of them apply, multiple pictures will be taken. Drive Mode is set to other than [Single]. → Set Drive Mode to [Single]. Bracket recording is set. → If any of the [ ] icons (ex. [ ], [ ], etc.) is displayed on the screen, bracket recording is set. Under [Bracket] in the [Rec] menu, set [Bracket Type] to [OFF].
65 DVQX2698 (ENG)