Setting a Standing Time 1 4 Level 2 5 Press and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. Number pads (see page 10 for maximum times). Press Start ; the delay time will count down, then cooking will begin. At the end of cooking, five beeps will sound. 3 NOTES: 1. When each stage finishes, the oven will beep twice. At the end of the program, the oven will beep five times. 2. If the oven door is opened Press Power Level until the desired power level appears in the display. P10 is the highest and P1 is the lowest.
during Stand Time, Kitchen Timer or Delay Time, the time on the display will continue to count down. 3. Stand Time and Delay start Press Timer/Clock (Less) once. cannot be programmed before any automatic function (such as Sensor Cook/Reheat, Popcorn and Turbo Defrost). This is to prevent the starting temperature of food from rising. 4. When using Standing time or Delay Start, it’s up to 2 power stages. 11 Operation (continue d) Cooking Time using the ber pads (see previous e for maximum times). e recipes call for a sta after cooking. Press P el until the desired po l appears in the displa cooking time using th