Playback Reception The radio wave status during the playback of Network Contents is displayed. (Only when a wireless connection is used) Dynamic Range Adjustment : Set the brightness of the entire screen when outputting HDR (High Dynamic Range) video to a connected HDR-compatible TV. Dynamic Range Conversion Adj. : When this unit is connected to a TV that does not support HDR (High Dynamic Range) input, HDR video is output converting to a SDR (Standard Dynamic Range) video signal. If you set a smaller value, their contrast will be reproduced more faithfully, but the entire screen will appear darker. To increase the brightness, set a larger value.
Video Settings These settings are also displayed by pressing [VIDEO SETTING]. Luminance Adjustment Adjust the contrast, brightness, tone curve (white/ black) and system gamma. Color Adjustment Adjust the color saturation and hue. Switch “Set 1”, “Set 2” or “Standard” by using [ 2 , 1 ] . Settings for BD Video playback, Ultra HD Blu-ray playback and settings for the playback of other types of media are registered separately. (The default settings for “Set 1”/ “Set 2” are the same as the settings for “Standard”.) You cannot change the “Standard” settings. Sharpness Adjustment Adjust the sharpness of images. The greater the value is, the sharper images will be.
Noise Reduction Reduce unnecessary noise in videos. The greater the value is, the less noise will appear. Bandwidth Limitation Adjust the bandwidth limitations. Display Select a setting suitable for your screen. Progressive Select the method of conversion for progressive output to suit the type of material being played. When the content is distorted, change the settings from “Auto” to “Video”. Picture Type Select the picture quality mode during play. Optimum HDR Adjustment This setting is also displayed by pressing and holding [HDR SETTING] for more than 2 seconds. ( > 21) Adjust the brightness, tone curve (white/ black), system gamma and the following settings: HDR Optimizer :
If “On” is selected, you can display highly bright scenes with smooth gradations based on the luminance information (HDR10 metadata) of playback content. This function works only for HDR (PQ) material. The effect may be enhanced by setting the “HDR Display Type” that matches your TV in the Setup menu. ( > 31) Reset to Default Video Settings Return “Video Settings” of the selected tab (“Set 1” or “Set 2”) to the factory preset. - 28 - Video Settings SU Beltltur a-1r HayD n Optimum HDR Adjustment Luminance AdjustmTenthe icon changes de Color Adjustment Sharpness Ad justmtehnte playback media. Noise Reducti on Reset to Defa ult Picture Settings