Using the control ring/control dial To change the settings assigned to the control ring/control dial Changes the settings assigned to the control ring/control dial. Press [MENU/SET] Press to select [Setup] menu and press [MENU/SET] Press to select [Ring/Dial Set] and press [MENU/SET] Press to select [ ] (control ring) or [ ] (control dial), and then press [MENU/SET] Press to select the setting and press [MENU/SET] The following settings can be assigned. [Default Control] [Zoom] [Step Zoom] [Exposure Comp.] [Aspect Ratio] [Sensitivity] [White Balance] [Not Set] (control ring only) Press [Q.MENU/ ] button several times The assigned function setting applies to all the recording modes.
However, the assigned function may not operate when combined with certain recording mode. Using Quick menu During recording, you can easily call some of the menu items and set them. Press [Q.MENU/ ] button Press to select menu items The menu items and setting items that are displayed differ depending on the recording mode. Turn the control ring or control dial to change the setting Press [MENU/SET] 26 SQT0612 (ENG)