Preparing media Disc 1 Press [CD x ] (main unit: [ x ]) to open the disc tray. Put in a disc with the label facing up. Press again to close the disc tray. 2 Press [USB/CD] (main unit: [SELECTOR]) repeatedly to select “CD”. USB Preparation Before you connect a USB device to the system, make sure you do a backup of the data. 1 Decrease the volume and connect the USB device to the USB port. Hold the main unit when connecting or disconnecting the USB device. 2 Press [USB/CD] (main unit: [SELECTOR]) repeatedly to select “USB”. Note: Do not use a USB extension cable. The system cannot recognize USB device connected through a cable.
Bluetooth ® You can connect and play an audio device wirelessly through Bluetooth ® . Preparation Turn on the main unit. Turn on the Bluetooth ® feature of the device and put the device near the system. Read the operating instructions of the device for details. Pairing a device Preparation If this system is connected to a Bluetooth ® device, disconnect it ( ~ 13). 1 Press [ ]. If “PAIRING” is shown, continue with step 4. 2 Press [PLAY MENU] to select “PAIRING”. Or press and hold [– PAIRING] on the main unit until “PAIRING” is shown. Continue with step 4. 3 Press [ R , T ] to select “OK? YES” and then press [OK]. “PAIRING” is shown. To cancel, select “OK? NO”.
4 Select “SC-PM270” from the Bluetooth ® menu of the device. If prompted for a passkey, input “0000”. The device connects with this system automatically after pairing is complete. The name of the connected device is shown for a few seconds. TQBM0945 Note: You can pair up to 8 devices with this system. If a 9th device is paired, the device that has not been used for the longest time will be replaced. 12