3-4 Switches 111 Press the odometer toggle switch to toggle between "Total Mileage" - "Mileage 1" - "Mileage 2" - "Total Mileage", and the instrument cluster displays the corresponding information toggle status. Press and hold "Mileage 1" and "Mileage 2" to clear the mileage information. The mileage per trip (Mileage 1 or Mileage 2) is calculated using a trip odometer. Mode Switch Group 3 These switches enable drivers to set the vehicle into regenerative braking, snow, or mode selection mode. Controller Operation ① Regenerative braking mode button The default setting is the standard regenerative braking mode. Toggle up the lever ① to increase regenerative braking force.
② Snow mode button Press down the snow mode switch ② to put the vehicle in snow mode. This mode is recommended on fairly strong surfaces that are covered with a layer of loose and slippery materials (e.g., grass, snow, ice, or gravel). Snow mode optimizes the towing, driving, and manipulation features in slippery conditions, and the accelerator pedal is selected with caution. ③ MODE button