4-1 Charging/Discharging Instructions 125 degrade, resulting in an extended charging time. To ensure charging efficiency, it is recommended to keep the A/C off during charging. When the heating or cooling function is enabled during charging, it is normal that both charging time and power consumption increase slightly. During charging, battery cooling may start, and the compressor, fan and other components work when necessary. It is normal that there will be some noise under the hood. During charging, the estimated remaining time to full charge is displayed on the instrument cluster.
It is normal that the remaining time to full charge may vary slightly depending on the temperatures, SOC, and charging facilities. If the charge port hatch is frozen due to weather or other reasons, do not force it open. Tip Do not open the charge port hatch forcibly when it is locked. 4 Do not forcibly insert the charging connector with the electrical lock locked. Using and Driving When the charge port cap is fully open, do not close the port hatch. When the vehicle is charged with an external power supply, it is normal that the cooling fan and A/C compressor may operate automatically in order for the power battery to heat up or cool down.
General Charging Troubleshooting Fault Possible Cause Solution Charger is onnected, harge starts, but battery will not harge. Power battery is full When the power battery is fully charged, the charging will stop automatically. Power battery tempera- ture is too high or too low Keep the vehicle in an environment with appropriate temperature and charge it when the temperature becomes normal. Starter iron battery over-discharges Replace the starter iron battery.